Sony Bravia XBR-85X800H Manuel De Référence page 10

• Be sure to store the unused screws and
Table-Top Stand in a safe place until you
are ready to attach the Table-Top Stand.
Keep the screws away from small
children.
Note
• Read the supplied Safety Booklet for additional
safety information.
• For more detailed information, visit Sony
Customer Support website.*
* Only on limited region/country/TV model.
XBR-85X80CH / 85X800H / 75X80CH /
75X800H / 65X80CH / 65X800H /
55X80CH / 55X800H only
1
Remove the screws from the rear of
the TV.
10
US
2
Attach the Wall-Mount Attachment
(supplied with the TV) to the rear of
the TV (to make it parallel with the
wall).
3
Attach the Wall-Mount Bracket (not
supplied) using the screws (not
supplied).
Note
• If using an electric screwdriver, set the torque
at approximately 1.5 N·m {15 kgf·cm}.
• Be sure to fasten the Wall-Mount Attachment
when attaching them to the TV.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool
might result in over torqueing the
Wall-Mount Attachment and damaging the
TV.
VS
1.5 N·m
{15 kgf·cm}
Wall-Mount Bracket
Screw