Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 120.109 Mode D'emploi

NOTE!
When polishing shoes, pay attention to the signs on the device and use the
proper brushes matching the colour of the shoes!
•
After polishing, turn the device off by pressing the ON/OFF switch.
•
Pay attention to the amount of polish in the dispenser by looking at the indicator.
Fill with polish as needed.
•
Disconnect the device from its power source by removing the plug from its socket if
the device will remain unused for a longer period.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must
not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device regularly.
o Before cleaning, disconnect the device from its socket by removing the plug.
o Clean the casing with a soft, moist cloth and mild cleaning agent.
o Use only soft cloths for cleaning and polishing the device.
o Never use any substances or tools to clean the device that may scratch it.
o Regularly clean the dirt-gathering mat and its shelf with a vacuum cleaner.
- 23 -