Outgoing Message - switel DCT 587x Combo Mode D'emploi

Answering Machine

Outgoing message

The answering machine is provided with two, pre−recorded outgoing messages (OGM). Both pre−
recorded outgoing messages can be replaced by ones of your own.
When Answer and Record mode is activated, the outgoing message
Answer Only mode is activated, outgoing message
When the answering machine memory space is full, the outgoing message of Answer Only mode
is automatically played.
Language of outgoing messages
You can change the language of the pre−recorded outgoing messages on the answering machine.
There are 4 languages available for selection.
m or n, i / j
m or n, i / j
m or n
i / j
Playing the outgoing message
. Menu Structure, Page 164 (
Recording your own outgoing message
A self−recorded outgoing message may be maximally 2 minutes long.
m or n, i / j
m or n,
OGM1
i / j
OGM2
or
m, i / j
m or n
ð,
m or n
Speak your message clearly and distinctly into the microphone on the base unit (at the front of the
unit) or on the handset. On ending the message, it is played back.
184
As soon as your own outgoing message is recorded, only that version is played.
Ans machine
Voice lang
, m or n
Play OGM
Ans machine
m or n
Record OGM
Pay attention that the outgoing message recorded is long enough (max. 2 minutes) to
be able to use the remote access function should you want to; . Remote access",
Page 188.
OGM2
,
,
Open the submenu
Select the language and confirm it
)
,
Select the menu
Select the outgoing message
,
Initiate the recording function
Speak your outgoing message
End and store the recording
OGM1
is used, when
is used.