Preparation; Connecting The Ac Adapter And Ac Power Cord - Citizen CT-S300 Mode D'emploi

3. PREPARATION

3.1 Connecting the AC Adapter and AC Power Cord

1. Turn off the printer power.
2. For the AC adapter type only: With the flat side of the AC adapter's cable
connector facing upward, insert the cable connector into the power connector
on the back side of the printer.
3. Connect the AC power cord to the inlet of the printer, and insert the AC
power-cord plug into a suitable wall outlet.
AC inlet
AC adapter
AC power cord
AC Adapter Type
CAUTION!
G Use only the specified AC adapter with the printer.
G When disconnecting a cable, do not pull out by the cable. Always hold the plug.
G Always keep the AC power supply away from other noise generating equipment.
G Do not pull the power cord. Otherwise fire, electric shock, or power disconnection
may result.
G If lightning is approaching, unplug the AC power cord from the wall outlet. Otherwise
fire or electric shock may result.
G Keep the power cord away from heat generating appliances. Otherwise the shield of
power cord may be fused resulting in a fire or electric shock.
G If the printer is not to be used for a long time, leave it disconnected from its supply
outlet.
Power connector
Flat side
Cable connector
AC power cord
— 11 —
Built-in Power Supply Type
AC inlet