Personalisation; Setting The Temperature; Setting The Spin Speed; Functions - Indesit XWC 71251 Mode D'emploi

Personalisation

Setting the temperature

Turning the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash
N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn't, it will flash and 3
beeps will be heard.
The washing machine will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
! Exception: if the 8 programme is selected, the temperature can be increased up to a value of 90°C.

Setting the spin speed

Turning the SPIN SPEED knobn to set the spin speed for the selected wash cycle.
N.B.: If the set value is compatible with the selected cycle, the knob indicator will be lit (fixed light). If it isn't, it will flash and 3
beeps will be heard.
The maximum spin speeds available for each wash cycle are as follows:
Wash cycles Maximum spin speed
Cottons 1200 rpm
Synthetics 800 rpm
Wool 800 rpm
The spin speed may be lowered, or the spin cycle can be excluded altogether by selecting the symbol
The washing machine will automatically prevent you from selecting a spin speed which is higher than the maximum speed
set for each wash cycle.

Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the
selected wash cycle.
Rapid
When this button is pressed the first time, the 9' icon will light up, when pressed the second time the 30' icon lights up and
the third time the 60' icon lights up. When pressed the fourth time the 9' icon lights up again.
! It cannot be used in conjunction with wash cycles 1-2-3-4-5-6-7-8-9-10-11-12-13- - .
Fast Forward
During a wash programme and under certain conditions, pressing this button allows for ending the wash programme after
only 20' if necessary, by performing a brief rinse cycle followed by a spin cycle at maximum 800 rpm or lower, if reduced
manually during the programme customisation phase. In this case, washing and rinsing performance will be reduced. After
pressing the button, the relative indicator light turns on together with the indicator light of the rinse phase. If the selected
temperature is equal to 40° and/or the button is pressed during the initial phase of the programme, the "Fast Forward" option
lasts longer so that the detergent can dissolve properly and avoid damaging the fabrics. In this case, the rinse phase indica-
tor light flashes while the wash indicator light remains fixed until the necessary activation conditions are fulfilled. If less than
20' remain of the wash programme, the option will be disabled.
! It cannot be used in conjunction with wash cycles 2-4-5-6-14- - .
Easy iron
By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end
of the cycle the washing machine will perform slow rotations of the drum, while the EASY IRON and START/PAUSE indicator
lights will flash and the END led will remain lit in a fixed manner. To end the cycle, press the START/PAUSE button or the
EASY IRON button.
! It cannot be used in conjunction with wash cycles 1-3-5-14- - .
Extra Rinse
By selecting this option, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 2-4-14- .
.
GB
.
9