Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GRW 12 E Professional Notice Originale

Masquer les pouces Voir aussi pour GRW 12 E Professional:
Table des Matières

Publicité

OBJ_BUCH-1972-004.book Page 10 Monday, October 17, 2016 7:57 AM
10 | English
 Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an
electric shock.
 Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
 Do not mix food. Power tools and their accessories are not
designed for processing food.
 Keep the cord away from the working area. The cord
may be entangled by the stirrer paddle.
 The mixing container must be suitable for mixing and
must stand securely. A container that is not properly se-
cured may move uncontrolled.
 Ensure that no liquid splashes against the housing of
the power tool. Liquid that has penetrated the power tool
can cause damage and lead to electric shock.
 Follow the instructions and warnings in the Material
Safety Data Sheets (MSDS) of the material to be mixed.
Material to be mixed may be harmful.
 In the event of a power interruption, release the lock-
ing switch by pressing the on/off switch. This will pre-
vent the power tool from restarting unintentionally (risk of
injury).
 Do not use the power tool in a stand.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.

Technical Data

Stirrer/Mixer
Article number
Rated power input
Output power
Gear selection, mechanical
No-load speed
– 1st gear
– 2nd gear
Rated speed
– 1st gear
– 2nd gear
Rated torque
– 1st gear
– 2nd gear
Tool holder
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
1 609 92A 2MN | (17.10.16)
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.

Intended Use

The machine is intended for mixing pulverised building mate-
rials such as mortar, plaster, adhesives, as well as solvent-
free paint, varnish and similar substances.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Gear selector(GRW 18-2 E)
2 On/Off switch
3 Lock-on button for On/Off switch
4 Drive spindle
5 Stirrer paddle*
6 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GRW 12 E
3 601 AA7 0..
W
1200
W
780
-1
min
0 – 1000
-1
min
-1
min
0 –620
-1
min
Nm
12
Nm
M14
GRW 18-2 E
3 601 AA8 0..
1800
1170
0 – 450
0 –1050
0 – 250
0 – 580
45
19
M14
Bosch Power Tools

Publicité

Table des Matières
loading

Table des Matières