Installation Instructions; Installation Clearance Requirements - Zephyr PRESRV PRW24C02BPG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Installation Clearance Requirements

When installing the wine cooler under a counter, follow the recommended spacing dimensions shown.
►
If the cooler is flush-mounted with the front of the cabinets, an additional 1/8" cabinet height
clearance will be required.
►
For proper clearance of the electrical plug, allow at least 1" of clearance at the back as shown in
the diagram.
►
An installation next to a wall will require a minimum 2-1/4" door clearance to accommodate the
Zephyr handle. If a custom handle is used, the dimensions will need to be measured accordingly
based on the handle dimensions.
►
The cabinet should allow at least 24" for the width and 34" for the height to accommodate the
wine cooler.
►
The power cable is located on the back right of the unit and has a length of 72" to accommodate
multiple outlet locations.
►
Once you are ready to install the unit, you must adjust the feet to level the wine cooler.
►
The installation should allow the unit to be pulled forward for servicing, if necessary.
18 PRW24C02BPG Use, Care, and Installation Guide
P R E S R V ™
W I N E C O O L E R
D U A L Z O N E