Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Reversing the Door Swing of Your Appliance
Should you desire to reverse the opening direction of the door, please follow the instructions below.
Safely reversing the door swing of your appliance should require at least two people.
1
1
1 2
1 3
7
1 4
9
10
1 5
18
1. Take out the 2 screws from the lower door axis
1
2
2. Take out the 3 hinge screws from the top right
3
4
6
5
3. All located at the bottom of the door, unscrew
8
4. Remove the 3 black decorative nails (9)
5. Install the lower door axis (11) and install the
11
PRB24C01AG-ADA Use, Care, and Installation Guide
(1), remove the door (2), and the axis plate (1)
from the door.
hinge (3) and remove it.
2 screws and remove the door magnet (4),
unscrew 2 screws and remove the door stopper
(5), unscrew 2 screws and remove the child
safety lock (6), and remove and discard the
Zephyr logo (7). Then, install the door magnet,
child safety lock, and new door stopper (8) on
the opposite side of the door frame. Rotate the
door 180 degrees and install the new Zephyr
logo at the top of the door by following the
steps on the next page.
from the top left of the cabinet. Install the
black decorative nails to the top right of the
cabinet and install the new top hinge (10)
from the hardware package that includes
the installation manual at the top left of the
cabinet with 3 screws.
door once correctly aligned.
P R E S R V ™
B E V E R A G E
C O O L E R
S I N G L E Z O N E
Publicité
Chapitres
Table des Matières
