Reversing The Door Swing Of Your Appliance - Zephyr PRB24F01AG Guide D'utilisation, D'entretien Et D'installation

Installation Instructions

Reversing the Door Swing of Your Appliance

Should you desire to reverse the opening direction of the door, please follow the instructions below.
Safely reversing the door swing of your appliance should require at least two people.
18
1
1. Open the door and using a Phillips screwdriver, remove the
bottom screws from the lower hinge.
2
2. Pull down to remove the glass door and place it on a padded
surface to prevent scratching it.
3
3. The door revolves 180 degrees. Remove the door magnet and
install it on the opposite side. Remove the silver plastic cover
from the top hinge of the door.
4
4. Remove the screws from the upper right hinge. Place the
upper right hinge in a safe place in case you need to reverse
the door in the future. Remove the decorative covers from
the upper left hinge corner. Install the upper left hinge by
fastening the screws through the left hinge to the cabinet.
Insert the decorative covers to the upper right hinge. Insert
the silver plastic cover to the bottom hinge of the door.
5
5. Remove the door axis from the lower right hinge. Install the
door axis on the lower left hinge.
6
6. Carefully insert the door into the upper left hinge, then slide
the door on top of the lower hinge and secure the door by
installing the lower screws.
PRB24F01AG Use, Care, and Installation Guide
P R E S R V ™
B E V E R A G E C O O L E R
S I N G L E Z O N E