Ce Declaration Of Conformity - Facom V.AG50F Notice Originale

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
NEVER USE THE MINI ANGLE GRINDER WITHOUT THE SAFETY GUARD
Model Deburring
wheel
mm
V.AG50F Ø 50
Model speed
Rated
rpm
V.AG50F 20000
* k = measurement uncertainty in dB ** k = measurement uncertainty in m/s²
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT V.AG50F
– FACOM Ø 50 MM MINI ANGLE GRINDER
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-7: 2012
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
NU-V.AG50F_0616.indd 8
Motor power Center hole max. wheel
diameter
rating
kW
mm
0,3 max. 10 max. 5
Air Working
consumption pressure
l/min bar
113 6,2

CE DECLARATION OF CONFORMITY

EMERGENCY
GATE VALVE
10 mm
Noise level
wide
Pressure dB(A) Power dB(A)
k*
mm
81 3 92
Weight Dimensions
kg mm
0,55 138 x 59 x 85
Vibrations level
m/s
Pressure dB(C)
k* k*
3 130 3 1,7
Markus Rompel
20.03.2016
Director Engineering
17/06/2016 13:27:12
2
k**
1,02