Domo DO9031WK Mode D'emploi page 28

DO9031WK
r
ead aLL instructions before using the appLiance
• Make sure that the voltage indicated on the appliance
(bottom of the water kettle and the base) matches the
voltage of the power outlet before connecting your water
kettle. if the voltages do not match, contact your supplier
and do not use the water kettle.
• the base should not be used for purposes for which it is
not intended.
• Never use the appliance without water in it, since this
could damage the heating elements.
• if by accident you should use the kettle without water in
it, the boil dry protection will automatically switch off
the appliance. if this happens, let the kettle cool down
completely before filling the kettle with water and boiling
it.
• Pull the plug out of the socket when the appliance is not
being used.
• Do not let the cord hang over a table or counter top edge
or do not let the cord touch hot surfaces.
• Do not place the water kettle near a hot gas or electric
stove or in a hot oven.
• Make sure that the water kettle is standing on a steady and
flat surface, where children can not reach the appliance.
this can prevent the kettle from tipping over, which can
prevent accidents.
• Never immerse the cord, plug or kettle in water or any
other liquids to prevent fire, electrical shock and injuries.
• always pour boiling water slowly and carefully, without
tipping the kettle too fast.
• when the water kettle is hot, always be careful when
28
.