First Aid - AEG SP16 Mode D'emploi

10
Technical Specifications
the jumper leads meet the requirements of DiN 72553 and are suitable for
wiring system voltages from of 12 V and 24 V.
the leads consist of insulated, copper-clad aluminium wires with fully insulated
terminal clamps.
Typ Item No.
sP 16 97203
sP 25 97204
sP 35 97205
* the electric conductance corresponds to a copper lead of this cross-section.

firSt aiD

in the event of contact with battery acid immediately wash or flush the affected
areas under running water. Seek immediate medical attention for chemical
burns of the eye or mucous membranes.
Cross-section* /
Length
16 mm² /
2 x 3 m
25 mm² /
2 x 3,5 m
35 mm² /
2 x 4,5 m
For engine displacement
up to
Petrol
2500 cm³
5500 cm³
7000 cm³
Diesel
-
3000 cm³
4000 cm³