Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8

STEAM IRONING

When using the iron for the first time, iron a plain cloth first.
It takes about 30 secs to obtain steam after pressing the steam jet button (2).
NOTE:It is normal, keeping a little steam for a moment comes out of the iron soleplate, when release
the steam jet button (2) after.
CAUTION! Please don't cut off the power immediately if there is still steam from the soleplate. You
must wait till no steam comes from the soleplate and then cut off the power. Otherwise, when you
turn on power next time, steam or water droppings will come out.
This appliance is also able to generate steam in a vertical position and can therefore be used to refresh
fabrics easily with a jet of steam.
If the production give the buzzer and at the same time the water level indicator light(7) flashes while
you are ironing , this means that there is no water inside the water tank(13).
To continue ironing. Please pour enough water in the water tank (13).Once the water tank is filled
again the buzzer will stop and the water level indicator light (7) will goes off.
DRY IRONING
Connect the appliance to the mains supply, only press the master switch (8), the master switch (8)
indicator light lights up, then select the desired temperature by turning the thermostat knob(3).Wait
until the iron heating indicator light(4) goes off, indicating that the desired temperature has been
reached.
PUTTING THE APPLIANCE AWAR
After use, always allow the iron to cool before putting it away.
- Empty the water tank.
- Position the Steam flexible hose- Power cable get together in the base of the appliance(10).
- Always keep the surface the ironing plate perfectly clean. To clean it, just wipe the cold surface with
a damp cloth. The appliance must not be cleaned with descaling agents.
-Do not iron over zippers, hooks, rings, etc; as these may scratch the plate.
- When you have finished ironing. Place the iron correctly on its stand. Ensure that there are no traces
of water under the plate, as these may cause stains.
- Store the appliance in a dry place.
SUGGESTIONS
- Divide the washing according to the correct ironing temperatures. Start by ironing those garments
that require a lower temperature. For fuller details, refer to the chart at end of this booklet.
- Fabrics such as velvet and wool, and accessories such as gloves, handbags, etc. will regain their
brand-new look and texture by simply passing the iron near the surface of the fabric and pressing the
steam button.
- Imprints left in carpets by furniture can be removed by applying steam on the parts where the pile
is crushed and the brushing lightly.
If the carpet is made of synthetic material, do not select a high temperature.

Publicité

Table des Matières
loading

Table des Matières