1.
Brushes - Permanently attached to drum holders and
come standard with 0.5 mm diameter nylon bristles. Op-
tional 0.7 mm diameter brushes are available for fine
material sweeping application.
2.
Lower drive shaft assembly - Included separately in
the carton and must be assembled to the ProSweep/
gear housing assembly. Contains flexible drive cable,
outer shaft housing and safety decal.
Description
3.
Flexible drive cable - Cable end fits into drive shaft
coupler of Pro Attachment Series or Split Boom models.
Lubricate drive cable every 25 hours with high tempera-
ture automotive grease.
4.
Brush gear housing assembly - Brushes come pre-
assembled to the gear housing in the carton. Brushes
rotate towards the operator viewed from the operators
position.
5.
Type and serial number
9
Description