Noise Emission Values; Important Information For Initial Operation; Operation Instructions; Service And Replacement Parts - erba 20056 Mode D'emploi

GB - INSTRUCTION MANUAL

6. NOISE EMISSION VALUES

See technical data.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.

8. OPERATION INSTRUCTIONS

Attach the gravity/suction cup (1) to the spray gun.
Fill the cup with paint/liquid.
Connect the spray gun to a suitable air compressor.
Check the needle pack (3) and make sure everything is airtight.
Adjust the spray shape regulator (4) and the paint flow regulator (5) to your liking.
The spray gun is now ready for use.
Clean the spray gun after use with suitable cleaning agent.

9. SERVICE AND REPLACEMENT PARTS

Use original spare parts only.

10. WARRANTY

Legal warranty regulations apply.

11. DISPOSAL

Our products are packed in order to prevent damage during transport. Packing materials are va-
luable resurces and therefore can and should be recycled. The product itself consists of various
materials (metals, oils, plastic, etc.) and should be disposed with care and in accordance with your
federal and local disposal regulations.

12. LEGAL INFORMATION

All rights reserved. This manual is copyrighted. Reproduction in and form (digital, print, etc.) is
strictly prohibited without the written permission of ERBA GmbH.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Page 9
Changes, print, punctuation and other errors reserved!
Instruction manual
20056/57
Issue: 03/2018