Product Description; Designated Use; Restrictions Of Use; Technical Data - erba HVLP Mode D'emploi

GB - INSTRUCTION MANUAL

2. PRODUCT DESCRIPTION

1 - Gravity cup
2 - Sieve
3 - Nozzle
4 - Self-adjusting needle packing (not visible)
Optional equipment:
- pressure regulator 20153
- Nozzle sizes: 1.3mm, 1.5 mm, 1.7mm, 1.9mm 2.2 mm

3. DESIGNATED USE

The paint gun is designed for spraying paint/lacquer while being connected to a suitable air com-
pressor. Any other use is prohbited. The buyer accepts all liabilities, legal and otherwise, for any
damage or injury resulting from improper use of the product (i.e. any other use than the above
stated designated use).
4. RESTRICTIONS
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.

5. TECHNICAL DATA

Nozzle size:
Working pressure:
Max. Working pressure:
Air consumption:
Connector:
Sound pressure level L(pa):
Sound pressure level L(wa):

6. NOISE EMISSION VALUES

See technical data - use of ear protection is recommended.

7. IMPORTANT INFORMATION FOR INITIAL OPERATION

See operation instructions.
ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
5 - Air regulator
6 - Air coupling 1/4"
7 - Round/wide spray dial
8 - Paint regulator
z20180
1,4 mm
2 - 3,5 bar
8 bar
~100 - 170 l/min
1/4"
68,9dB(A)±3dB
79,9dB(A)±3dB
Page 11
Changes, print, punctuation and other errors reserved!
z20148
0,8 mm
2 - 3,5 bar
8 bar
~60 - 100 l/min
1/4"
62,4dB(A)±3dB
73,4dB(A)±3dB
Instruction manual
20148/20180
Issue: 10/2017