Video Output; Freesync - LDLC Pano + Guide D'utilisation

Video output:

Connect an HDMI or DP cable to the output of the corresponding monitor and verify that it is
connected to the corresponding port on the motherboard of your computer or on its graphics card if it
is equipped.
Connecteurs
HDMI x2

FreeSync:

The feature itself is off by default. To use this feature, you'll need:
1. A computer equipped with Free Sync technology
2. An HDMI cable
3. Updated graphic pilots.
connect your computer and monitor with an HDMI cable. After connecting, you may receive a prompt
to enable the feature on your computer. If you do not receive the prompt, you may need to enable the
function in your graphics card menu. See your graphics card manufacturer's documentation for
instructions on how to turn on and/or enable FreeSync.
Connecteur
DP