Panasonic CS-E15NKE-3 Mode D'emploi page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
TO PURIFY THE AIR
6
• Removes/deactivates harmful micro-organisms such as
viruses, bacteria, etc.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing cannot be adjusted.
• nanoe-G starts automatically with the unit switched on
OFF/ON
with
.
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
7
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical airfl ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
TO SWITCH BETWEEN POWERFUL & QUIET
8
POWERFUL
POWERFUL/
QUIET
TO REACH TEMPERATURE
POWERFUL
QUICKLY
This operation stops automatically after 20
minutes.
TO ENJOY QUIET
QUIET
OPERATION
• This operation reduces airfl ow noises.
TO MONITOR HUMAN PRESENCE &
ACTIVITY, SUNLIGHT FOR ENERGY SAVING
9
10
& COMFORT
To optimize energy
ECONAVI
saving
AUTO
To maximize comfort
COMFORT
• When either operation is activated, the unit will start
to initialize for approximately 1 minute. Human activity
indicator is blinking in sequence.
• After initialization, the human activity sensor will start
to detect the level of heat source & movement, the unit
adjusts the temperature and airfl ow to keep you comfort
consistently.
NANOE-G
QUIET
NORMAL
POWERFUL
QUIET
AUTO COMFORT
Heat Source & Movement
Low
COOL/DRY Mode
Set Temperature
+1 tap*
Set Fan Speed
HEAT Mode
+0.3°C
Set Temperature
Set Fan Speed
* For first 15 minutes or until set temperature is reached.
• The human activity sensor will also scan for area of heat
source and movement in a room.
Human activity indicator Heat source & movement
• The unit will determine the heat source & movement
hotspot, and automatically adjust horizontal airfl ow
direction louver either fi x at predetermined position or
swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING
and AUTO COMFORT operation will be cancel.
• The human activity sensor may not detect moving objects
further than 7m away or beyond detection angle.
• The human activity sensor sensitivity is infl uenced by
indoor unit location, movement speed, temperature range,
etc.
• The human activity sensor may:
- Mistakenly detects an object with heat source &
movement similar to human, such as pets, etc. as
human being.
- Mistakenly detects as non-heat source & movement if
a person stays motionless for certain period of time.
• During ECONAVI operation, the sunlight sensor
detects sunlight intensity coming through windows and
differentiates between sunny and cloudy/night to further
optimize energy saving by adjusting the temperature.
Ambient condition
Cloudy/
Night
COOL/DRY Mode
Set Temperature
HEAT Mode
Set Temperature
ECONAVI is activated while it is cloudy / night
ECONAVI is activated while it is sunny
• In a room without window or with thick curtain, the
sunlight sensor will judge as cloudy/night.
High Normal
None
+1°C
-1°C
≤ Medium
Fan
+1 tap
-2°C
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
is selected, the ECONAVI
Sunny
Cloudy/
Sunny
Night
+1°C
-1°C
+2°C
-2°C
-1°C
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cs-xe15nke-3Cu-e15nke-3

Table des Matières