Domo DO7056S Mode D'emploi page 20

PARTS
1. Steam plate
2. Steam button with locking button
3. Unlocking button for water reservoir
4. Water tank
5. Indicator light
6. On-off button
7. Brush head
USE
· Fill the water reservoir in accordance with the instructions "fill the water reservoir".
· Put the plug into the outlet and press the on/off button. The indicator light will begin to flash.
· The water in the water reservoir will heat up. After about 35 seconds, the appliance will have heated,
and the indicator light will stay blue.
· Always check the label with instructions on the item of clothing first.
· To use the steam function, press and hold the steam button. When you release the button, the
appliance will stop producing steam.
· If you want constant steam, press and hold the steam button and move the locking button down. To
stop steaming, move the locking button up to release the steam button.
· While steaming, it is normal to hear the water being pumped. This can also be felt in the handle.
· To remove wrinkles, press the steam plate against the material while steaming. Move the clothing
steamer over the material. Do be careful not to continue to steam the same location for too long.
· CAUTION: always be careful when using the steamer. The appliance and the steam are hot. Never aim
steam at people.
· After use, switch the appliance off by pressing the on/off button. The indicator light will go off. Remove
the plug from the socket.
· Allow the appliance to cool completely. Remove the water from the reservoir and store the appliance.
· If the appliance is not used for 15 minutes, it will turn off automatically. If you wish to activate the
appliance again, press on the steam button or the on/off button and wait until the appliance has
reheated.
20
DO7056S
7
This symbol means that the item of clothing should not be ironed or steamed.
1
2
3
4
5
6