Linstalling The Usb Driver - T&D RTR-500NW Manuel D'utilisation

LInstalling the USB Driver

Have you already installed the supplied software?
Before connecting a Unit to a PC with a USB cable make sure to install the supplied
software first.
If the Base Unit is not an RTR-500W, please follow directions for installing the USB Device
Drivers found in the Introductory Manual that came with the Base Unit you are using.
1.
Open the "RTR-500W for Windows" from the Start Screen or Start
Menu.
2.
Open the RTR-500W Settings Utility.
3.
Connect the Unit with the supplied USB cable to your computer.
The USB driver installation will start automatically.
- Do not connect a Unit to your computer until the software has been installed.
- It is not necessary to connect the AC adaptor at this point.
4.
After the USB driver installation is completed, the factory default
settings will be displayed automatically in the settings window.
22 Préparation