ENERGY SISTEM 6030 Manuel De L'utilisateur page 63

PC CONNECTION
≥
In order to enjoy the multimedia capabilities of your MP5 Energy™, you have to first
copy your favourite files from your PC to its internal memory, or use a Micro-SD
memory expansion card.
Note: Turn off your MP5 Energy™ each time you insert/extract your Micro-SD card
to avoid accidental data losses.
Connect your MP5 Energy™ to the computer using the USB 2.0 cable included. The
device will be detected automatically without installing any driver (except Windows
98, in which case you have to install the W98 driver from the "SOFTWARE/
Firmware" folder inside your MP5 built-in memory). Once detected, you can read/
write to the device's memory just as if you where using a regular disk drive.
IMPORTANT: To avoid any data loss, always perform a safe USB device extraction
before disconnecting the USB cable from the device of the PC. In Windows XP, for
example, you can find the safe extraction icon in the task bar, next to the system
clock.
63