Detachable Trolley System - Dicota DataBox Allround XL Trolley Mode D'emploi

User Manual DataBox Allround XL Trolley

Detachable trolley system

Detachable trolley system
DataBox Allround XL Trolley features a detachable trolley system, which can be removed with a few turns of the hand.
Mind the following steps:
1) Firmly push the spring mechanism (Fig. 8 (1)) on the bottom part of the trolley system and carefully pull out the rods away from the case and out of
the lower fastening. (Fig. 8 (2))
2) After that, you must press the trolley system up, so you can remove it from the top fastening. (Fig. 9 und (1))
(2)
Fig. 8
If you want to reattach the trolley system, simply proceed in the exact opposite order as when detaching the system.
Mind the following steps:
1) At first, you must attach the rods to the upper fastening, so that it is firmly planted in the fastening.
2) Afterwards, firmly press the spring mechanism and push it to the trolley, (Fig. 10 (1)) until the mechanism locks to the fastening on its own (Fig. 11 (1))
(1)
Abb. 10
(1)
Fig. 9
Abb. 11
(1)
(1)
10