Technical Data; Noise/Vibration Information - Bosch Professional GRO 10,8 V-Li Notice Originale

OBJ_BUCH-2020-001.book Page 17 Tuesday, November 26, 2013 2:57 PM
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Cutting disc
2 Holding rod
3 Grinding accessory*
4 "PowerLight"
5 Spindle lock
6 On/Off switch
7 Speed regulator
8 Battery charge-control indicator
9 Battery pack
10 Direction-of-rotation arrow for grinding spindle
11 Dust protection cap (for detailed work)
12 Clamping nut
13 Collet of the collet chuck
14 Handle (insulated gripping surface)
15 Inner shank dimension L
0
16 Battery unlocking button
17 Open-end spanner/Screwdriver
18 Shank
19 Collet
20 Drive spindle
21 Dust protection cap (for working close to surfaces)
* The accessories illustrated or described are not included as
standard delivery.

Technical Data

Cordless multi rotary tool
Article number
Rated voltage
Rated speed
Collet chuck-Ø
Spanner flat of collet chuck
Max. outer diameter:
– Cutting disc
– Grinding accessory
– Wire brush
– Grinding disc
– Drill bit
Max. inner shank dimension L
0
Max. shank length
Weight according to
EPTA-Procedure 01/2003
Technical data determined with battery from delivery scope.
Battery
Permitted ambient tempera-
ture
– when charging
– during operation*
– during storage
Recommended batteries
* Limited performance at temperatures <0
Bosch Power Tools

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 74 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a
determined according to EN 60745:
a =9 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
GRO 10,8 V-LI
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
3 601 JC5 0..
lowing standards or standardisation documents: EN 60745
V= 10.8
according to the provisions of the directives 2009/125/EC
-1
min 5000 –35000
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
mm 3.2
2006/42/EC.
mm 9.55
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
mm 38
mm 22.5
Henk Becker
mm 20
Executive Vice President
mm 20
Engineering
mm 3.2
mm 10
mm 35
Robert Bosch GmbH, Power Tools Division
kg 0.6
D-70745 Leinfelden-Echterdingen
Leinfelden, 26.11.2013
Assembly
Battery Charging
°C 0...+45
 Use only the battery chargers listed on the accessories
°C –20...+50
°C –20...+60
GBA 10,8V x,xAh 0-.
°C
(triax vector sum) and uncertainty K
h
2 2
, K=1.5 m/s .
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
page. Only these battery chargers are matched to the lith-
ium ion battery of your power tool.
English | 17
1 619 P11 460 | (26.11.13)