Technical Specifications - Palmer PAN02PRO Manuel D'utilisation

TECHNICAL SPECIFICATIONS

DI Box active
Product Type:
Type:
Number of Channels:
Number of Inputs:
Input Connections:
Max. Input Level:
Input Impedance:
Input Attenuation:
Signal Gain:
Number of Outputs:
Number of THRU Outputs per
Channel:
Output Connections:
Maximum Output Voltage:
Output Impedance:
Frequency Response:
Transformer-balanced:
Translation Ratio (Ratio):
Controls:
Power Supply:
Power Consumption:
Housing Material:
Housing Surface:
Width:
Depth:
Height:
Weight:
8
DI box
active
1
2
6.3 mm mono jack (TS jack), XLR/f unbalanced, PIN 1 & 3 bridged.
45 dBu
0 dB & 12 dB: 1 MOhm; -10 & -20 dB: 70 kOhm; -30 dB: 40 kOhms
0 dB, -10 dB, -20 dB, -30 dB
+12 dB
1
1
XLR/f balanced, 6.3 mm jack
15 dBu @ 1 kOhm load with phantom power; 19.7 dBu @ 1 kOhm;
> 20 dBu @ 10 kOhms at 9 V battery
600 ohms
20 Hz - 20,000 Hz
yes
3.16:1, 10:1, 31.6:1, 1:4
Ground-Lift, Attenuator, Boost, 9 VBat/+48 V/Power Off
9 V block battery, + 48 V phantom power
at 0 dBu @ 600 ohms: approx 4 mA/48 V or 18 mA / 9 V
sheet steel
powder coated
116 mm
140 mm
43.5 mm
0.85 kg