Perel WC220 Mode D'emploi page 7

3.
4.
5.
Snoozing or Switching the Alarm On/Off
1.
2.
3.
4.
When the alarm is sounding, press the snooze button to silence
the alarm. The alarm will buzz again after the previously set
snooze duration.
When the alarm is sounding, press RADIO/SLEEP to stop the
alarm.
Display Brightness
In normal mode, press the snooze button to select the display
brightness. Selecting sequence:
FM Radio
1.
2.
3.
4.
5.
6.
V. 01 – 13/12/2019
WC220
Press AL 1-2/ON-OFF again. The bu digit will flash. Select
the alarm sound source with
bu = wake to buzzer
When in radio mode, press AL 1-2/ON-OFF again. Select
the high or low radio volume with
Press AL 1-2/ON-OFF again. The A2 alarm hour will flash.
Set the hour with
Press SET again to confirm and to return to normal mode.
Press AL 1-2/ON-OFF once to activate alarm A1.
Press AL 1-2/ON-OFF once again to activate alarm A2.
Press AL 1-2/ON-OFF once again to activate alarm A1 and
A2.
Press AL 1-2/ON-OFF once again to deactivate alarm A1
and A2.
Press RADIO/SLEEP to switch on the FM radio.
To adjust the volume, press VOL once and adjust the
volume with or
Set the frequency with
Press and hold SET until mE appears on the display and
P01 flashes.
Press SET again to memorize the frequency.
Repeat steps 3 to 5 to pre-set up to 10 frequencies. To
access a pre-set station, press SET in radio mode until the
desired frequency is selected.
Press the snooze button once to switch off the FM radio.
or
rd = wake to radio
or . Repeat the steps above.
high → low → off
from low (L00) to high (L15).
or .
7
.
or .
©Velleman nv