Facom NJ.1300F Notice Originale page 6

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Square Impact
drive rate
''
NJ.1300F 3/8 600
Model Free speed
rpm
NJ.1300F 12500
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE WE FACOM S A S 6/8 RUE GUSTAVE EIFFEL BP 99 91 423 MORANGIS CEDEX FRANCE DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT NJ.1300F – FACOM 3/8" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN 792-6 :2000 +A1:2008
BS EN ISO 12100-1:2003+A1:2009
BS EN ISO 12100-2:2003+A1:2009
EN ISO 15744:2008
EN 28662-1:1993 &BS EN ISO 28927-2
• BEFORE EACH OPERATION, CHECK:
- Only use suitable FACOM sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Recommended
Maximum
dynamic
dynamic torque
torque
N.m N.m
7 - 68 102
Air consumption Working pressure
l/min bar
85 6,2
** k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
Noise level
Pressure dB(A) Power dB(A) Pressure dB(C)
k* k*
94,7 3 105,7 3 95,2
Weight Dimensions
kg mm
1,24 137x167x49
F
ACOM QUALITY MANAGER
Vibrations
level
m/s 2
k* k**
3 4 0,89
20.01.2010