Facom NJ.1400F Notice Originale page 6

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
Model Square Impact
drive rate
''
NJ.1400F 3/8 1350
Model Free speed
rpm
NJ.1400F 12000
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE WE FACOM S A S 6/8 RUE GUSTAVE EIFFEL BP 99 91 423 MORANGIS CEDEX FRANCE DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT NJ.1400F – FACOM 3/8" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN 792-6 :2000 +A1:2008
BS EN ISO 12100-1:2003+A1:2009
BS EN ISO 12100-2:2003+A1:2009
EN ISO 15744:2008
EN 28662-1:1993 &BS EN ISO 8662-7:1997
NU-NJ.1400F_0110.indd 6 NU-NJ.1400F_0110.indd 6
• BEFORE EACH OPERATION, CHECK:
- Only use suitable FACOM sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Recommended
Maximum Guaranteed
dynamic
dynamic
torque
torque
N.m N.m
60 67
Air consumption Working
pressure
l/min bar
34 6,2
** k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
Noise level dB(A)
static
Pressure
torque
N.m k*
45 87,4 5 98
Weight Dimensions
kg mm
0,47 140x47x40
F
Vibrations
level
Power
m/s
2
k* k**
5 7,6 4
20.01.2010
ACOM QUALITY MANAGER
09/06/2010 14:25:16 09/06/2010 14:25:16