Publicité
Les langues disponibles
Les langues disponibles
PLACING THE MACHINE IN SERVICE
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm
through the machine's inlet connection.
3
Model
NJ.1300F2
Model
Free speed
rpm
NJ.1300F2
12500
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - BP 99 - 91 423 MORANGIS CEDEX FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE
PRODUCT NJ.1300F2 – FACOM 3/8" AIR IMPACT WRENCH
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-6: 2010
EN ISO 12100:2010
EN ISO 15744:2008
EN ISO 28927-2:2009
LUBRIFICATION
• BEFORE EACH OPERATION, CHECK:
- Only use suitable FACOM sockets and flogging spanner accessories, (''IMPACT'') as well as
safety devices, bush and pin for mounting one of these cases on a drilled driving
square.
- The drive square condition (no marks, cracks or excessive wear).
- The condition of the safety devices (bush and pin) on the drilled square as well as the draw
bead on the non-drilled square.
Square
Impact
Breakaway
drive
rate
Torque
''
N.m
3/8
705
180
Air consumption
l/min
74
** k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY
Pressure dB(A)
k*
94,7
3
Working pressure
Weight
bar
kg
6,2
1,2
EMERGENCY
GATE VALVE
Noise level
Power dB(A)
Pressure dB(C)
k*
105,7
3
95,2
Dimensions
mm
137x168x50
F
ACOM QUALITY MANAGER
Vibrations
level
m/s
2
k*
k**
3
4
0,89
27.07.2012
Publicité
