General Information - Tecsis P3278 Mode D'emploi

1. General information

1. General information
The pressure sensor described in the operating instructions has been designed and
manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during
production. Our management systems are certiied to ISO 9001.
GB
These operating instructions contain important information on handling the instrument.
Working safely requires that all safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety
regulations for the instrument's range of use.
The operating instructions are part of the product and must be kept in the immediate
vicinity of the instrument and readily accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the operating instructions
prior to beginning any work.
The manufacturer's liability is void in the event of any damage caused by using the
product contrary to its intended use, non-compliance with these operating instructions,
assignment of insuficiently qualiied skilled personnel or unauthorised modiications to
the instrument.
The general terms and conditions contained in the sales documentation shall apply.
Subject to technical modiications.
Further information:
- Internet address:
- Relevant data sheet:
- Application consultant: Phone: (+49) 69/5806-2357
26
www.tecsis.de
DE7000
Fax: (+49) 69/5806-8002357
E-mail: pressure@tecsis.de
Operating instructions pressure sensor P3278