Akrapovic Yamaha YZF-R125 Instructions D'installation page 71

3. Slide the muffler onto the header tube and attach the springs. (F 07).
IMPORTANT: make sure, that springs pull the muffler all the way onto the link pipe – use rubber mallet if
necessary to tap the connection into place!
4. Align the muffler in respect to the motorcycle and tighten the bracket bolt using bolt, nut and washers from Akrapovič
installation kit, to the specified torque (F 08, 09).
IMPORTANT: be careful not to scratch or damage any part of the motorcycle during this procedure!
9 / 14
F 07
F 08