Use - Casselin CTQPM Mode D'emploi

In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.

5.2 Use

WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
Take the device out of the packaging and place it on a flat, solid surface.
When the appliance is located near walls, partitions, other decorative materials or finishes etc., it is
recommended that they are made of non-flammable material and if it is flammable to cover them
of non-flammable material. All fire prevention measures must be in place.
As soon as the device is installed according to international standards and rules, it is operational. Before
using for the first time, heat the device for 10 minutes until the fumes and odors have dissipated.
Plug in the device. Select the two resistors or only the top one using the switch
dedicated. Choose the temperature according to the position of the grid and the choice of cooking. The
resistance will automatically heat up to maximum. Depending on the type of food, set the duration. Once
the cooking time is over, the alarm will sound. Once cooking is complete, turn the thermostat to OFF and
unplug the appliance after use.
NOTE
The device is fitted with a safety system in the event of overheating. If tripped, unplug the device and allow it
to cool. If this protection system operates regularly, it is imperative to contact your dealer.
After automatic shutdown, the device can only be put into service by pressing the Reset button on the back
of the device, wait for the temperature to drop, press the Reset button.
Adjustable
Resistance adjustment
up or up / down
Timer
EN