Frequency Plan - IKUSI ONE 118 Manuel D'utilisation

Specific equipment information
NoTE
InformationJonJtheJequipment,JtheJpro-
grammeJversion,JtheJmanufacturingJdate,J
theJnumberJofJhoursJoperating,JtheJtem-
peratureJandJtheJequipmentJserialJnumberJ
areJdisplayedJonJtheJscreen.
Restore factory values
CAUTIoN
ThisJfunctionJwillJmeanJthatJallJpreviousJ
configurationsJwillJbeJlostJandJtheJfactoryJ
valuesJwillJbeJrestored.
1) SelectJOKJtoJrestoreJfactoryJvalues.J

Frequency plan

NoTE
YouJcanJchooseJbetweenJtwoJdifferentJ
channelJallocationsJforJtheJUHFJband.J
TheseJallocationsJdependJonJtheJgeo-
graphicJterritory.JBy default the equip-
ment is configured for the European
allocation.
1)
InJtheJadvancedJmenu,JlocatedJandJselect
FREQUENCY PLAN.
a)J IfJEUROPEJisJselectedJtheJchannelJalloca-
tionJisJforJEuropeanJstandards.
b)J IfJAUSTRALIANJisJselectedJtheJchannelJ
allocationJisJforJAustralianJstandard.
Outputs number configuration
NoTE
YouJcanJchooseJtwoJtypesJofJconfigurationJ
forJOutputsJNo:JTV2J&JTV1JorJTV1.J
By default your equipment is configu-
red for two outputs (TV1 & TV2).
1)
InJtheJadvancedJmenu,JlocatedJandJselectJ
OUTPUT CONFIGURATION TV2&TV1.
a)J OUTPUTJCONFJTV2J&JTV1Jselect.
b)J OUTPUTJCONFJJTV1Jselect.
Equipment installation and configuration
TV2 & TV1
/ Advanced settings
EN
TV1
41