Haier HWR05XCM Guide D'utilisation Et D'entretien page 21

USING THE REMOTE CONTROL cont.
TO SET TIMER TO TURN ON THE AIR CONDITIONER, CHANGING THE PREVIOUS
SETTINGS:
1. Turn on the air conditioner.
2. Adjust the mode to Fan, Energy Save, Cool or Dehum.
3. F r o Fan or Dehum mode,adjust the fan speed to High,Med or Low. For Cool or Energy Save
mode,adjust the fan speed to High,Med, Low or Auto Cool.
NOTE:In Dehum mode,when the set temperature is close to the ambient temperature,the
compressor may stop and the fan will run in low speed only.
4. Adjust the temperature between 61°F and 86°F (16°C and 30°C).
NOTE: In Fan mode, the temperature cannot be set.
5. r P ess TIMER. Timer On indicator light on the air conditioner control panel will flash. Display will
show remaining hours before the air conditioner will turn on.
6. r P ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
7. Timer On indicator light on the air conditioner control panel will remain on.
TO CLEAR TIMER DELAY PROGRAM:
NOTE: Air conditioner can be either on or off.
Press TIMER until Timer indicator light turns off.
TO SEE OR CHANGE THE REMAINING TIME (IN HOURS):
TIMER OFF:
1. r P ess the TEMP/TIME up or down arrow button to increase or decrease the time.
2. A t f r e 5 seconds, the display on the air conditioner control panel will show the remaining time to
Timer Off.
TIMER ON:
1. Display on the air conditioner control panel will show remaining time.
2. r P ess the TEMP/TIME up or down arrow button to increase or decrease the time.
USING YOUR AIR CONDITIONER
ENGLISH
PAGE 19