Schneider Airsystems SGS 140-1/2 Notice D'utilisation D'origine page 9

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Commissioning .........................
1.7 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the
instruction manual!
1.4 Technical data
Power
Air consumption
Max. permissible pressure
Rotational speed
Maximum releasing torque (quality grade 8.8)
Maximum tightening torque (quality grade 8.8)
Impact mechanism
Socket spanner adapter
Application range with quality grade 8.8
(maximum thread size):
Sound pressure level L
as per DIN 45 635, part 20
Pulse sound power level L
as per DIN 45 635, part 20
Vibrations as per DIN ISO 8662
Overall dimensions: width x depth x height
Recommended hose diameter (inner) at L= 10 m
Weight
1.5 Components
01 Plug nipple
02 Trigger lever
04 Deflector lever
05 Drive shaft
(at distance of 1 m)
pa
wa
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2 Scope of delivery
3
– Impact wrench
3
– Exhaust air hose
3
– Instruction manual
3
4
1.3 Conventional use
4
The compressed impact wrench
is an industrial tool designed for:
Fastening and loosening or inserting and un-
screwing threaded connections in different
application areas in line with the maximum
power.
Any other type of use is considered contrary
to the intended use.
06 Retaining ring
08 Housing
13 Screws
15 Supply/exhaust air hose
16 Hose clamp with screw
SGS 140 - 1/2"
0,75 kW
7 l/sec
6,3 bar
7000 rpm
650 Nm
640 Nm
Dual-ring hammer
impact mechanism
1/2 Inches
M 18
86 dB(A)
90 dB(A)
0,3 m/s
165 x 65 x 217 mm
9 mm
2,66 kg
GB
2
I/ 3