EcoNet RETST700SYS Guide D'utilisation page 8

System Modes (con't)
Select a Mode
80 80
Resume Schedule
75 71
Auto Heat Cool
Home Away
OFF
Fan
Cooling to
70 65
BACK
80 80 80
Resume Schedule
75 71 75
Home Home Away
Cooling to
70 65 85
Select a Mode
80 80
Resume Schedule
75 71
Auto Heat Cool
Home Away
OFF
Fan
Cooling to
70 65
BACK
Select a Mode
80 80
Resume Schedule
71 75
Auto Heat Cool
Away Home
OFF
Fan
Cooling to
65 70
BACK
> Return to Table of Contents
Cool – Turns on cooling when the current temperature rises above your set
point temperature. When there is an active call for cooling, the words 'Cooling
E
To' will appear above the cooling set point.
E Heat
44% 44%
(Cooling set point screen)
!
44% 44% 44%
E-Heat (Heat Pump Systems Only) – The emergency heat option is a manual
setting, not an automatic function initiated by the heat pump thermostat. The
E
purpose of the emergency heat setting is to bring the backup heat source
E Heat
online immediately to deliver 100% of the home's heating demand while
44% 44%
simultaneously locking out the heat pump.
Fan Only – While in Fan Only mode, the heating/cooling equipment is turned
off. Use the plus or minus adjustment buttons to navigate between fan
E
speeds from Low to High. Press Mode again to reactivate a heating or cooling
E Heat
mode. Fan only is a manual override of a set schedule. If a schedule is being
44% 44%
followed, the fan speed will return to the scheduled fan speed when you
reactivate the heating/cooling equipment. You can set continuous fan when in
Heating, Cooling or Auto mode from the Settings screen.
EcoNet Smart Thermostat User Guide
®
8