SoFlow SO3 Mode D'emploi Original page 17

Error message
•
E1: Communication failure
•
E2: Error with the brake
•
E3: Error with the transfer handles
•
E5: Error with the control
Stop using SO3 immediately if the display shows one of these error messages. Switch the unit off and on again. Check the plug connection between the handlebars and the front bar that no dirt
will affect the contacts of the plugs. Make sure that the battery is fully charged. If the error message still persists, contact the SoFlow service at info@soflow.com.
copyright by www.soflow.com 16