Connection; Wiring Diagram; Installation On Rv - Furrion FSFP50MAT-BL Manuel D'instructions

Connection

Wiring Diagram

Rooftop box

Installation on RV

1. Mount the PWM controller inside of the RV near the battery inside of the front compartment.
2. Connect the battery's positive and negative terminals to the PWM controller battery output
(installer may need to create an exit hole and seal).
15
PWM SOLAR CHARGE
CONTROLLER GEN 2.0
Model: C-FSFP50MAT-A03
System Voltage: 12V
CAUTION: The default setting is for use with
sealed lead-acid batteries. For a di erent
battery type, please refer to the instruction
manual or visit www.furrion.com.
Mode Key
50W Rigid Solar Panel
Fuse
+ -
12V
Battery
(Fuse and 12V battery
not included.)
50W Rigid Solar Panel
Rooftop Box
16AWG Cable
(Inside RV)
PWM Controller
(Inside RV)
(Fuse and 12V battery
not included.)
Fuse
12V
Battery