Location Requirements - Haier HWR05XCM Guide D'utilisation Et D'entretien

ENGLISH

LOCATION REQUIREMENTS

IMPORTANT:
O
conditioner will be installed. Make sure you have everything necessary for correct
installation.
THE LOCATION SHOULD PROVIDE:
• A grounded electrical outlet within 6 ft. (183 cm) of where the power supply cord exits the air
conditioner, for models:
HWR05XCM ESA405N ESA406N ESA408N
• A grounded electrical outlet within 4 ft. (122 cm) of where the power supply cord exits the air
conditioner, for models:
ESA410N ESA412N
NOTE: o D not use an extension cord, plug adapter, surge protector or multi-outlet adapter.
• Free movement of air in the room to be cooled.
• A large enough window opening for the air conditioner. (See Fig.2)
• T he air conditioner must not be installed in a through-the-wall sleeve or in a wall. It can only be
installed in a double-hung window.
NOTE: The outside cabinet louvers and air discharge must not be obstructed by bushes, trees, etc.
Air must be able to pass freely through the cabinet louvers. (See Fig.1)
Fig. 1
CABINET LOUVERS
WINDOW INSTALLATION
Window opening measurements: (See Fig.2)
A. Width Min/Max
B. Height Min
PAGE 6
s b r e e v all governing codes and ordinances. Check the location where the air
HWR05XCM ESA405N/ESA406N
22"-36" 24-1/2" - 36"
13-3/8"
INSTALLATION REQUIREMENTS
AIR DISCHARGE
ESA408N/ESA410N
25" - 36-21/32"
13-3/8"
Fig. 2
B-HEIGHT
A-WIDTH
ESA412N
26-1/8" - 37-25/32"
14-9/16" 14-9/16"