Lupus Electronics LUPUSNET LE965 Guide Rapide page 13

4. The GUI of IP Installer is as follows (Default IP：192.168.1.200).
5. IP Installer will search all IP Cameras connected on LAN. The user can
click "Search Device" to search again.
6. Click one of IP Cameras listed on the left side of IP Installer, then the
network configuration of that IP Camera will be listed on the right side. If
parameters changed, click on "Submit". Then, the network configuration
will be changed. Just click "OK" to reboot IP Camera.
7. Please make sure the subnet of IP address of PC and IP CAM is the
same.
The same Subnet:
IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100
Different Subnets:
IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100
Change PC IP address:
Control PanelNetwork ConnectionsLocal Area Connection
PropertiesInternet Protocol (TCP/IP) Properties
Please make sure your IP Camera and PC have the same Subnet. If not,
please change IP Camera IP subnet or PC IP subnet accordingly.
13/24