OK. OSF 401-W Mode D'emploi page 25

Size - A5
ASSEMBLING AND MOUNTING
10
Secure the rear guard with
the plastic nut.
13
Open the clips on the front
guard.
16
Place on a stable level
surface.
OSF401W_OSF441W_A5_130107.indb 25
25
11
Slide the fan blade onto
the motor shaft so that the
pin locks to the groove.
14
Hook the front guard onto
the rear guard, thereby
aligning the screw holes at
the bottom of the guards.
Install the screw and nut to
lock the guards.
17
Set the desired angle.
12
Secure the fan blade by
tightening the spinner onto
the shaft.
15
Make sure all the clips are
closed
9/1/13 11:09 AM