Greencut EB560L Manuel D'utilisation page 38

38
CAIR SPEED CONTROLS
Turn the speed control wheel to accelerate or decelerate the air speed. By pressing the turbo button, the air speed will
accelerate immediately to its maximum power.
OPERATION
The blower can be used to clean corners, fences, walls, wood areas or under cars. Be careful of how the air jet points,
as it could move heavy materials and cause injury or damage. Do not put part of your body as hands and fingers in the
exhaust opening. Turn the switch to the "on" position and aim and move the tool forward slowly to collect the leaves
or to move the leaves from unreachable areas.
Avoid collisions with hard objects that could damage your blower. Make sure the switch is in the "OFF" position, and
the battery is disconnected before cleaning, performing inspections or moving the device from one place to another.
BATTERY INSTALLATION AND REMOVAL
Slide the battery into your blower. Make sure the battery is properly connected to the blower. To remove the battery,
press the release button and slide the battery out of the tool.
Battery Release Button
Turbo Button