Box Contents; Assembly; Product Use - Greencut EB560L Manuel D'utilisation

BOX CONTENTS

-
Blower with mounted rear tube.
-
Blower's front tube.
-
User manual.
This product requires some assembly.
• Remove the product and accessories from the box. Make sure all items are present.
• Inspect the product to ensure that it has not been broken or damaged in transit.
• Do not discard the packaging material until you have carefully inspected and satisfactorily used the product.
ATTENTION: If any part is missing or damaged, contact the Official Technical Service. Do not use
this product without having replaced the missing or damaged part. Using this product with
damaged or missing parts can cause serious injury to the operator.

ASSEMBLY

TUBE ASSEMBLY
To attach the front tube to the back tube of the blower, align the tubes so that the open slot of the front tube is
aligned with the rear tube latch. Press firmly until the slot locks into place on the tube latch. Make sure the connection
is properly secured.

PRODUCT USE

START UP
Slide the ON/OFF switch forward to the "ON" position. To turn the tool off, slide it back to the "OFF" position.
ATTENTION: Do not use the blower with any type of accessory, as doing so could result in a
dangerous situation.
Open Slot
37
EN