Citizen CT-S251 Mode D'emploi page 62

Switch no. Function
MSW13-1 Security/Target
MSW13-5 BT Device Scan
MSW13-6 Auto Reconnect
Notes:
*If print data is very dense, the print head is hot, data transmission is slow, or some other conditions, the motor
and printing may occasionally stop which causes white stripes in the printout. To print high-density data, set
MSW2-3 (Spool Print) to ON to reduce striping, although this increases the time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
Initial setting
Low/All Low/All, Mid/All, Mid/Paired only, Hi/All, Hi/Paired only
Discoverable No Response, Discoverable
Valid Invalid, Valid
62
— —
Setting value