Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Tape measure
Phillips screwdriver
Level
Parts Needed
Screws (type to be determined by the requirements of the
cabinet material)
Product Dimensions
B
A. 14" (3.6 cm)
B. 22⁷⁄₈" (58.1 cm)
B
A. 17³⁄₄" (45.1 cm)
B. 17³⁄₄" (45.1 cm)
INSTALLATION REQUIREMENTS
A
A
Cabinet Dimensions
C
D
A. 12¹⁄₄" (31.1 cm)
B. 3" (7.6 cm) min. to other accessories
C. 20⁷⁄₈" (53 cm)
D. 2¹⁄₂" (6.4 cm) min.
Installation Instructions
WARNING
Excessive Weight Hazard
Use two or more people to move and install
trash drawer.
Failure to do so can result in back or other injury.
1. Using two or more people, lift the trash drawer and gently
insert into the cabinet cutout. Make sure the trash drawer is
flush to the face of the cabinet.
2. Open drawer to check the levelness of the trash drawer.
Install screws (not supplied) in mounting holes and tighten.
3. Close drawer.
B
A
3
Publicité
Table des Matières
