Disposal And Recycling; User Safety Information - Elinchrom EL-19279 Manuel D'utilisation

DISpOSAL AND RECyCLING

This device has been manufactured to the highest standards from materials, which
can be recycled or disposed of in a manner that is not environmentally damaging.
The device may be taken back after use to be recycled, provided that it is returned
in a condition that is the result of normal use. Any components not reclaimable will
be disposed of in an environmentally acceptable manner.
If you have any question on disposal, please contact your local office or your local
ELINCHROM Agent (please visit our website for a list of all ELINCHROM agents
worldwide).

USER SAfETy INfORMATION

• Keep electronic equipment out of reach of unauthorized persons whenever
possible
• Do not use in restricted area (like hospitals, always ask permission before).
• This product is designed for indoor use only and should not come into contact
with water or dust. To prevent overheating the product should not be used with
covers whilst in use.
• This product is designed only for Elinchrom Ranger Lithium-Ion Batteries. Do
not use with other equipment.
• This product contains dangerous voltages; the housing should not be removed.
• The internal fuse protects the charger, which blows if a fault occurs. Only the
authorized Elinchrom service is permitted to repair this charger.
• Avoid that the housing gets in contact with oils, grease etc. The plastic might be
damaged by chemicals and solvents.
CHARGING INSTRUCTIONS fOR LI-ION CHARGER 19279
AND LI-ION CAR CHARGER 11037
• Connect the Li-Ion Charger 19279 first to the mains and than to the Li-Ion
battery.
• Proceed in the same way with the Li-Ion Car Charger 11037 first to the 12 V car
multi plug and than to the Li-Ion battery.
• Charge progress is displayed by an orange LED.
• After approx. 45 min. (19279) / 90 min. (11037) of charging, a yellow LED
indicates, that the battery is charged up to 80 - 95%.
• A green LED indicates a completely charged battery.
User Manual
EN
5