Operation Instructions - Commercial CHEF CHM009 Manuel D'utilisateur

SET UP & USE

OPERATION INSTRUCTIONS

SIGNALS DURING OVEN
SETTINGS
ONE SIGNAL: Oven accepts the entry.
TWO SIGNALS: Oven does not accept
the entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time.
3. Touch CLOCK pad again.
NOTE: · This is a 12-hour cycle clock.
When the oven is first plugged in or
when power resumes after a power
interruption, the display will show
ENTER CLOCK TIME. If you prefer not to
have the clock displayed, touch RESET.
SETTING THE OVEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching
the number pads. Digital time is in
minutes and seconds and set left
to right. Set one digital (a 5 for 5
seconds) or up to four digits (2405 for
24 minutes, 5 seconds).
3. Touch START/+30 SEC.
NOTE: · Time countdown can be seen
in display for 3 seconds before
clock or cooking time is returned
to display
· Touch TIMER and then touch
RESET to cancel TIMER during
timing process.
SETTING A COOKING
PROGRAM
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
2. If you want to set a power level other
than 100% power, touch POWER, and
then use the number pads to enter the
power level.
3. Touch START/+30 sec. to start
cooking. Use the digits to set a
cooking power level:
NUMBER PAD
1,0
9
8
7
6
5
4
3
2
1
POWER
100%
90%
80%
70%
60%
50%
40%
30%
20%
10%
Page 13