CHI 13107 Manuel D'utilisation Et D'entretien page 6

How to Dry and Steam Iron
w CAUTION
temperature setting or failing to allow the iron to preheat for
2 minutes can result in hot water dripping from the soleplate.
1. To Steam Iron: Make sure iron is unplugged.
Lift Water Fill Door and add untreated tap water
to the MAX Fill Line through the opening. If you
have extremely hard water, mix 50% untreated
tap water with 50% distilled or demineralized
water for use in the iron. Press to snap cover
closed. Plug into outlet and the red Power Indicator Light
comes on. Press Temperature Setting Button to select
temperature setting. Linen or cotton, are recommended for
steaming. Move Adjustable Steam Lever to desired amount
of steam.
To Dry Iron: Plug into outlet. Press
Temperature Setting Button to select
temperature setting.
2. Preheat 2 minutes to reach desired
temperature. Iron will beep when ready. Make
sure Adjustable Steam Lever is in
are now ready to iron.
3. To turn iron off, move Adjustable Steam Lever to
and press Temperature Setting Button to turn OFF . Unplug.
6
Burn Hazard. Attempting to steam iron on a lower
(Dry Iron) position. You
(Dry Iron)