Sound Settings; Setting The Sound; Setting Fader/Balance - JVC KW-NT500HDT Manuel D'instructions

Sound Settings

Setting the Sound

You can set the audio effects and sound quality in the vehicle here.
Set the sound when the AV source is selected. This cannot be set when the AV source is turned off (on standby).
1
Press - <Settings>.
2
3
Set each item.
Sets the subwoofer level
The following items can be set.
Menu items
Fader/Balance Sets the right and left, and
front and rear volume balance.
(☞ right)
Position Sets the listening position.
(☞ page 91)
Equalizer Sets the sound quality.
(☞ page 93)
Audio Effects Sets the audio effects.
(☞ page 94)
Speaker Settings Sets the speaker configuration.
(☞ page 89)
Vehicle Type
Sets the vehicle type. (☞ page 89)
Volume Adjust Sets the volume of each AV source
equal. (☞ page 94)
Others Sets the built-in amp.
(☞ page 96)
Description
88

Setting Fader/Balance

You can set the right and left, and front and rear
volume balance here.
1
Press - <Settings> - <Sound>.
2
3
Touch the position to be balanced.
You can also adjust the right / left balance by
touching or , and adjust front / rear
balance by touching
Touching [Center] sets the right and left, and front
and rear balance at the center.
or .