Using Pioneer Smart Sync/App - Pioneer FH-S820DAB Mode D'emploi

Purpose
Search for a track from a list
Pause/resume playback
Thumbs Up (Only for radio)
Thumbs Down (Only for radio)
Random play (Only for track/album/artist/
playlist)
Repeat play (Only for track/album/artist/
playlist)
Start a radio channel based on the song
currently being played.
NOTE
Some functions of Spotify may not be operated from the unit.

Using Pioneer Smart Sync/APP

Pioneer Smart Sync is the application that intelligently brings your maps, messages, and
music together in the vehicle.
You can operate the unit from Pioneer Smart Sync installed on an iPhone/Android
device. In some cases, you can control aspects of the application, such as source
selection, pause, etc., by using the unit.
For details on what operations are available on the application, see the application's help
section.
NOTE
The APP source is not available when a Pioneer Smart Sync connection is not made or [USB MTP] is set
to [ON] in the SYSTEM settings (page 29).
WARNING
• Functions operated with a smartphone are merely tools available to the driver. The driver shall
observe safe and sensible driving behavior under all circumstances.
• Do not attempt to operate the application while driving. Make sure to pull off the road and park your
vehicle in a safe location before attempting to use the controls on the application.
Operation
1 Press and hold
2 Turn the M.C. dial to select the desired
category, then press to confirm.
3 Turn the M.C. dial to select the desired
file, then press to confirm.
Playback starts.
Press 4/PAUSE.
Press 1/ .
Press 2/ .
Press 5/ .
Press 6/ .
1 Press and hold 5/
2 Press the M.C. dial.
• This function may not be available
depending on the selected song.
- 18 -
to display the list.
to start a radio.