Hama TS35C Mode D'emploi page 5

Warning – Batteries
• Do not allow children to change batteries without supervision.
• Do not mix old and new batteries or batteries of a different type
or make.
• Remove the batteries from products that are not being used for
an extended period (unless these are being kept ready for an
emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries or allow them to enter
the environment. They can contain toxic, environmentally harmful
heavy metals.
• Immediately remove and dispose of dead batteries from the
product.
• Avoid storing, charging or using the device in extreme temperatures
and extremely low atmospheric pressure (for example, at high
altitudes).
4. Getting started
• Open the battery compartment (2).
• Move the CH slide switch (4) to the left or right to select the channel
on which the measuring station transmits.
• Insert two AA batteries with the correct polarity.
• Once the channel has been assigned to a transmitter, it can only be
changed by removing the batteries or by resetting the measuring
station (see section 6.5 Reset).
• Then close the battery compartment cover.
4